二槽电解式模具清洗机
  • 二槽电解式模具清洗机

  • 产品分类:电解模具清洗机系列

  • 产品品牌:

  • 会员价格:¥75000.00

  • 发布日期:2025-5-4 9:28:5

  • 产品简介:

    电解超声波模具清洗机原理:Electroanalysis ultrasonic mould cleaner principle 电解超声波是由电解超声波清洗槽,喷淋清洗槽,超声波系统,电解电路系统,电极,托盘,过滤循环系统,定时装置,面板电器开关装置组成。 Electroanalysis ultrasonic includes electroanalysis ultrasonic wash tank, spray wash tank, ultrasonic system, electroanalysis circuit system, electrode, tray, filtration cycling system, timing setting and panel switch. 1,电解清洗是利用电解作用将金属表面的污垢去除的清洗方法;电解是在电流作用下,物质发生化学分解的过程.在电解过程中,金属表面的污垢开始脱落,在超声波的冲击下加速了剥离,在金属表面沾有动植物油,矿物油,锈迹,锈斑,积炭,氧化层.用电解的方法把这些污垢去除叫电解脱脂。Electroanalysis cleaning is a method by electroanalysis function to remove the dirt from metal surface; electroanalysis is a process which the matter with chemical decomposition. The dirt of the metal surface fall off during the electroanalysis, and accelerate the peel off speed with the concussion from ultrasonic. The electrolytic method is used to remove the propagation oil, mineral oil, rust spots, oxide layer from metal surface which is called electroanalysis degrease. 当电流通过含有特殊配方的电解质的水溶液时,在电解槽的正极附近产生氧气,负极产生氢气.把要清洗的金属部件放入电解槽的正极(清洗篮),在电解过程中,在金属表面会有细小的氢气产生,这些小气泡促使污垢从金属表面剥离。 The anode of the electrobath will produce Oxygen and cathode will produce the hydrogen when there is current pass water solution with special electrolytical mixture. Put the metal parts into the anode of the electrobath(clean basket), there will produce small hydrogen on the metal surface, and these small air bubbles will prompt the dirt peel off from metal surface. 2,超声波清洗是利用28KHZ的高频电源,使换能器由电能转换机械能的过程,在这过程中换能器向清洗槽溶液传递巨大的能量,在液体中产生正压和负压区,形成数以万计的空穴气泡,在不断的形成爆炸,冲击被清洗金属物表面,使金属表面的污垢快速脱离。 The ultrasonic cleaning use the 28KHZ high frequency power supply and the transducer by converting electric energy to mechanical energy. In the transducer to the cleaning solution tank transfer huge energy, produce positive pressure and negative pressure zone in the liquid, tens of thousands of cavitation bubbles formation, in continuous form into the explosion, the impact is cleaning the metal surface and quickly out of the dirt on the surface of the metal.3,循环系统是由耐腐蚀的广州小巨人磁力泵,过滤器组成自循环,让清洗脱落的污垢迅速被过滤棉芯隔离,减少液面漂浮物.同时可加速溶液的电解。净化溶液,提高溶液的利用率。 Circulatory system is by the corrosion of the little giant magnetic pump, filter self circulation, let washing off the dirt quickly filtered cotton core isolation, reduce the liquid surface floater. Also can accelerate the

  • 产品订购热线:13828757635
产品简介:

一, HSD-2030LT电解模具清洗机技术参数描述

HSD-1020L Electroanalysis mould cleaner technology meter description

1,        HSD-2030LT洗模机,容积20L,超声波震动板是由SUS2.50MM316不锈钢板焊接而成;左右侧板SUS2.0MM316不锈钢板焊接而成;外封门板采用SUS316 1.0mm制作,外形尺寸,1450*800*900MM。

HSD-2050L cleaner, the cubage is 50L, ultrasonic shake panel is made of SUS2.50MM316 stainless steel panel soldering and SUS2.0MM316 stainless steel panels soldering for left and right side, the outside door is made of SUS316 1.0mm, the outline dimension is 1450*800*900MM

 

 

 

 

产 品 名  称

Product Name

规格型号

Spec.

内槽尺寸

Inner dimension

机器功率

Power

电解式超声波模具清洗机

Electroanalysis ultrasonic mould cleaner

HSD-2030L

450*350*200mm

1.2KW

洗净笼采用SUS316扁钢焊接而成,外包绿胶,耐酸耐碱,耐高温,耐磨。

Wash tank is made of SUS316, wrapped with green glue, acid, alkali, high temperature and abrasion resistant

 

400*300*200mm

 

金型模具洗净液(电解清洗液)

Golden mould clean liquid

HSD-102C

20L/桶

20L/bucket

 

 

网上采购:
姓名:
*
手机或电话:
*
邮箱:
*
采购意向描述:
*
请填写采购的产品数量和产品描述,方便我们进行统一备货。
验证码:
换一组
相关产品
产品评论
 
  • 该产品没有收到任何评价!

验证码:
看不清楚?点击换张图片