4， 在清洗模具时，请把模具放入清洗篮内，再把清洗篮放入机器清洗槽内。不要直接往清洗槽内扔模具。这样会把清洗液飞溅到人的身体上。
in cleaning the mold, please put the mold into the cleaning basket, and then put the cleaning basket into the machine cleaning tank. Don't throw the mold directly into the sink. This will splash the cleaning liquid onto the human body.
5， 在使用过程中尽量少用手接触模具清洗液，防止皮肤过敏，如果不小心让接触到身体皮肤请用大量清水冲洗；在正常情况下人手指短时间接触模具清洗液后，用水冲洗后是不会造成伤害的。
5, in the process of using as little as possible by hand contact mold cleaning fluid, to prevent skin allergies, if not careful to make contact with the body skin, please rinse with plenty of water; contact mold cleaning fluid in normal human fingers after a short time, after washing with water is not harm.
6， 在使用过程中如果不小心飞溅到人眼睛里，请及时用大量清水冲洗或用食用白醋兑水冲洗，请急时送医。
6, in the process of use, if not careful splash into the eyes, please use plenty of water rinse or use vinegar with water rinse, please send the doctor in urgent time.
7， 电解模具清洗液呈碱性，不能和酸性的清洗液混合使用，也不能和其它不明离子碱性清洗液混合使用。
the electrolytic mold cleaning liquid is alkaline, can not be mixed with acid cleaning liquid, and can not be mixed with other unknown ion cleaning liquid.
8， 模具电解清洗液使用后的废液和废去物不能随便排放入下水道，应用塑胶桶收集，请有资质的环保公司处理，如本公司有污水处理系统方可排放。
8, the use of electrolytic cleaning liquid waste and waste materials can not be arbitrarily placed in the sewer, the discharge of plastic bucket collection, please qualified environmental protection company recycling, such as the company's sewage treatment system can handle.
9, 模具清洗液保质期为三年，清洗液在使用过程中，可以可连续使用2-3个月。或当清洗液浑浊变黑后请立即更换成新的清洗液。同时更换清洗机上不锈钢过滤器里的过滤棉芯。
Mold cleaning fluid shelf life of three years, the cleaning liquid can be used in the process of continuous use for 2-3 months. Or when the cleaning solution becomes dark, please change it into a new cleaning solution immediately. Replace the filter cotton core in the stainless steel filter at the same time.